ATTENTION: The glassBYTEs.com forum is being retooled and will return with a new look and functionality that will hopefully help our readers even more. Watch for an announcement when it will be ready, it will be a few months.
You can still stay up on daily news and comment on stories by signing up for the glassBYTEs daily e-newsletter at glass.com/subcenter. There is no charge. Hope to see you there!
Had to pull one at a Junk Yard today because No one has them, One Vendor doesn't have it in the entire US, And it's 4 wheeler season... (Meaning I do a ton of these this time of year) What is the deal?
I want to know if your sliding a back glass under a deck lid, is this not stuffing? I mean come on how many of us would love to have a second set of hands when setting some back glass's ? stuff with no stops , no place to put stops, bead hidden by deck lid that has t...
Anyone having complaints of a vibrating air noise coming from
cowl on 12 grand cherokee, some have noise before replacement
and others get it after? Any fix?
In light of the quest for the perfect bead of urethane, and that some continue to challenge the generally accepted recommended “Isosceles” triangular bead, a committee was established to study the situation.
The committee was gleaned from a multitude o...
I only replace a few windshields a year for my car lot and since those windshields are already broken, I didn't worry too much on how I got them out. Now I'm looking to remove undamaged glass for when a car needs paintwork as well as removing and storing glass from p...
I was checking out 14 Murano w/rainsensor that will need replacing this week.I pulled the sensor to see what was needed and saw it had the gel, I let sensor hang and left gel on w/shield my question is will it cause problem if cranked while hanging still connected to...
We do RV and Bus Glass from time to time. Right now we have a homemade basket to hold glass and bodies centered on the vehicle. It is attached to a forklift. Then we have ladders and cups for the sides. It works. It is makeshift and could be seriously improved. But,...
Just did a 2015 Chrysler 200, they sure changed these cars a lot. The cowl is a much better design and easier to get off, even though it still has an excessive amount of pins to hold it in place under the hood, it cuts out very easy! I used my Glass Bot on it but i c...
Ok I haven't been on in a while, who on here use's a microfiber towel to clean and prep there glass, instead of using paper towels? I was sold on the idea from one of the wholesalers and it's not a bad idea, just looking for some input on this. They said you can was...
I'm an installer in Canada. I've just come back from carpel tunnel surgery(in the us you call it H.a.v.s) on both my wrists. I've noticed the pain is quite noticeable after about 3 min. of using air cutout tool. To lessen my pain and keep me installing longer I've be...
Was told the convention was not very well attended. Haven't heard otherwise. Would like to attend someday, but my question is, why isn't it in January or February when I am looking for something to do? And in a spot like Vegas where people will go just to go. Jus...
I've been fortunate to own & operate a shop in a city with dense population. People want me to replace their w/s because of my quilty craftsmanship, honest ethics, excellent warranty & reasonable prices. They will drop their car off & have a ride or I will drive the...
Recently my 2011 Ford F-150 rear window popped and shattered after turning on my rear window defroster. There was fog on my windows, maybe 40 degrees out, I was parked and within 2 minutes the passenger side window panel popped and shattered.Ford tells me it's not th...
Anyone know if the B?G from the 14 will fit the 15? dealer has no info, Suppliers and Nags info not out yet... Just a stationary part, YP, no defrost...
I have been commenting on various subjects on this forum for the last year. You may know me as the "Rollerdeck Guy". That being said, I understand the rules of this forum and respect them. I'm not here to talk about my product in particular, rather than proper proced...
Is anyone else being told when calling in to check on referrals or open invoices with SGC they can only take one referral per call? I was told today this started on 10/17. The representative told me it was understanbly (sorry their word not mine and I can't figure o...
http://www.glassbytes.com/2014/10/maryland-woman-sues-safelite-alleging-it-refused-to-fix-damage-its-technician-caused-to-her-vehicle/
I have to agree with Slavelite on this one. We get our customer to sign a waiver for possible further damage caused by the broke...
don't use too much of this brand and I do like it but it seems that 3 out of 5 windshields the mirror bracket falls off. Am I the only one having this issue. Now we just remove and remount at the shop.before installation.
The 7th paragraph starts:
"While insurance providers typically sway customers to replace their windshield......"
This guy must live in some parallel universe.
I generally would never read AGRR, however the article about EBAY intrigued me enough to read the article. I find it amusing how many in the industry have never heard of this. It is obvious to me that they never read the forum as this has been touched on many...
On Wednesday night, October 8, 2014, the IGA announced a new IGA program that finally allows glass shops to invoice their fair and reasonable pricing without any interference. Initially, the program will be with insurance companies, to be announced soon, that use the...
If they pull this off, stick a fork in the industry because it's done. Apparently the Justice system designed to protect American businesses is broken. Too many politicians are more concerned with their $$$$ donations then then what is fair to the American people.
The Independent Glass Association will be hosting an Industry Appreciation Party on October 8, 2014 beginning at 8PM. This event is during Auto Glass Week 2014 and the party will held at the Renaissance Baltimore Harborplace Hotel.
IGA members receive complimentar...
Wow, thats refreshing; all it required was to open my mind.
the single tpa's days are numbered. Glass is gold, what other industry has shops stupid enough to kneel before any entity that wants to set their pricing? Just because this guy says he worries about payc...
WOW dw 2135gby rain sensor, lane departure, and forward crash detection. This w/s has a 4 large pins on the glass plus a huge metal bracket for the rain sensor and the mirror button is attached to that!
Anyone have done these yet and are they BAD or not too bad?...
We haven't got the new updates yet, so i was wondering if any of you had the Jan.10,2011 NAGS list prices for DW1341GBY,DW1658 and the labor hours also.
How nice that Safelite is monitoring their employees with robocom. Monitors let employees see who the slackers are. Have fun using the bathroom😬😬😬
Here is what I received today:
Attention : Sales & Customer Service
My name is Mr Richard Neil with the Neil Inc and i am contacting your business in regards to the order for some Auto Glass or windshield and i am after the 2000 model ford explorer 4 door winshie...
Hey all,
I need to replace my Econoline sometime in the next 6-8 months or so... maybe sooner. Tired of getting 12 MPG on average, but like the room. The Transit Connect gets my attention, but figure they are too small. Especially since I do Flat glass too. Look...
can anyone help me locate these drill bits are from London or the UK..... All Star Glass in California uses them and I tried them a few times. They Leave the tiniest of all holes and worked great. Does anyone know the contact info to buy these drill bits for my dr...