I met an old gentleman last week that has a complete 1923 or 1924 Star car that has been completely disassembled stored in the loft of his tractor shed. I had a chance to see what I could see of the car but it is stored with a host of other car parts and it was quite...
Hi, thanks for reading this. I have run into a different issue once I changed my ignition system. (to recap: Points, distributor cap, rotor, coil and condenser were all replaced)
When I started the car, I did get it to start a couple of times, but it was running wei...
I'm planning to attend the annual meeting as a first timer, so here's a couple of dumb questions. Is there any area set up as a swap meet or is it strictly a car show of fully restored cars ? I could bring a parts car for sale and other parts or I could just bring...
I am getting ready to start up the D40 for the first time in 45 years. The motor is not seized but needs a number of things. I am planning to buy a Zenith 14544 carburetor to replace the Tilstson. It also needs points, distributer cap, rotor, condenser, plugs and wir...
It was my first day going out with the Durant M2. It was supposed to be fun, however, it turned into a long night.
I made it home, I hadn't really gone far. I just was going to get gas near my house, but unfortunately I live in the middle of a hill.
The largest...
Anyone have a measurement on the far back end of the sills width. I've got measurements all along up to the dogleg but not the final at the rear where the tub fits. Read in an old partner article that that has to be correct for the rear fenders to line up with the fr...
It's that very fine Southern Gentleman we all know and Founding President of the DMAC's, Birthday Today! In 1998 it was Yates and others that decided to keep the best antique automobile club going after the passing of Jeff Gillis the previous club coordinator. Happy...
Gentlemen:
We finally have the 1922 A22 Durant running. The engine seems to heat up very quickly, and the exhaust tube( still using the original backbone with a new exhaust tube inserted) seems to get overly hot after a few minutes of running.
Also the overhead...
Sent my starter off to Advanced Electrical Rebuilders in Grand Ledge, Michigan for a complete rebuild. www.aerrebuild.com. Jason was recommended by several individuals on the AACA Forum. He did a complete rebuild, plus made a new tag up etc. The photos do not do it j...
Hello all!
I'm buying a 26 Star from a man just East of Phoenix and have developed health issues that will greatly delay the original pick-up date. I was supposed to pick the car up in late July or August but medical issues will prevent that for several months and p...
Got a question for my fellow Durantonians. Are all coils the same? Besides of course 12 volt and 6 volt. Does our cars, particularly the 28/29 models take any special type of coil?
Just opened my July/Aug AACA mag and see Howard Reinke's 31 Sport sedan on page 58. Brings back good memories of riding with Howard at the Traverse City meet.
Gary
I purchased this project in pieces so didn't have the luxury of taking it apart and knowing where all the pieces fit.
The Steering/Spark/Throttle column has two vertical 3/16 threaded holes approximately 2 inches below the spark and throttle levers.. The hole spaci...
Hi All....
If you are a New York resident this bill is important to you. Please help your fellow car collectors.
Ed Vomero forwarded this to me.....
>> Many of you may know about the legislation that was reintroduced into our state assembly to provide that...
I have spent today mostly trying to get the car to run, which it is now, though rough, and I think maybe hot? I can still touch the rad hose.
The parts that were switched were:
New Ignition coil
New condenser
New rotor
New Distributor Cap
New Points
The po...
1929 Rugby on Australian TV
While watching season two of Miss Fisher Mysteries in an episode called Marked for Murder I noticed what appeared to be a 1929 or 28 Rugby Touring car.
It had a lime green body with black fenders and top. There were 3 or 4 scenes with...
My name is Amy Carlton and I am the owner of Great American Estate Sales in Grand Junction, CO.
We are liquidating a massive estate and have for sale a 1926 Durant Star. We also will have a Durant Star radiator.
Please visit our website at www.gjestatesales.net...
I am installing a new coil. I saw that this is either a negative or positive ground system but I'm not sure which. Should my positive go to the distributor or negative. The old coil only had words like to dist and to battery. No polarity info on the bottom of the ol...
I am looking for advice on how to center the shaft coming out of the clutch. There is no pilot shaft and the clutch is held to the flywheel by 3 bolts. It is running out about .050" causing the engine to vibrate. When the clutch is not attached to the flywheel the...
Anybody been watching "The Making of the Mob" on AMC channel. I watched the first two episodes and what are the Mobsters driving in a couple of scenes. A Flint. In several shots you can clearly see the Flint radiator emblem. Car belongs to a newer DMAC member in Mary...
I noticed there are several parts out there, I am going to get one of each of these as mine are looking pretty rough. I have been having stalling issues, so I thought this would be something that might help.
I want to get:
Condenser
Distributor Cap
Distributor...
Hi folks:
Still not too late to come to Guelph, Ontario for the period June 28 to July 1. We have a good group planning on attending and lots of festivities planned.
See information on the "Club Events" page. You snooze - you lose.
Gord
Hi,
I own a hood ornament from a 1933 Continental Flyer. The car that was once attached to it was owned by my uncle who purchased it in 1934.
Anyway, I am interested in what artist created this hood ornament. Does anybody here happen to know this?
Regards
Hello everyone,
Our 1927 Star restoration has reached the point of paint. We are currently exploring colors and contemplating over which shade of blue to paint the body of the car. We are very fond of the 1927 Star Model M owned by Bob Porter; and would love to kn...
I hope this is not an omen of difficulties ahead but, I called the hotel in Mendota Heights today concerning any extra fees and charges they would charge us. Instead of reaching the hotel I was redirected to someplace in Europe to a fellow speaking English with a hea...
On the last West Coast Tour, my Star wouldn't start without priming it through the spark plug hole. This was true even when gasoline was dribbling out the carburetor intake. Once started, however, it ran fine. Roger showed me how to hold my hand over the carbureto...
Sirs :
I think my charging gauge (on dash) does not work.
I think my generator is charging but once this summer battery was dead.
So:
I got a volt-meter. Have been doing tests, all tests were done with engine running.
Test #1 on battery poles show 6.0 volt...
Seems as though a housing developer is hell bent on demolishing most of the former Durant Motors of Canada Head Offices on Laird Drive in Leaside. Even though the building has Heritage status they are determined to convert it to seven story 109 unit condominium with...
Hello, I have Rugby 1928 and I need information of the mechanism of advance of the distributor. The Rugby has command to the left side. As the rods are installed for moving the distributor.
Sir, I need help
Have done everything to get a new roof on my touring star.
Found irons, saddles and new ribs. Assembled all material and snaps and have had a roof built with snap secures so it is removable.
Status
Roof is on and sown and looks great. But h...
I stumbled across this advertisement on the HAMB for what is being called a 1929 Durant Ruby Truck in Ottawa, Ontario.
http://www.jalopyjournal.com/forum/threads/29-rugby-durant-truck.950374/
Anyone know what the story might be? Interesting at least.
Who will be joining us at the Guelph meet this year.
SUNDAY JUNE 28 to WED JULY 1
[see Club Events section]
Mary and I will be there to see old friends and make new ones.
Jack & Mary
Well my next project today was to remove my water pump off the side of my motor. Any tricks or secrets I need to know before I start to restore it? Started taking it apart and the shaft seems frozen, haven't really worked at it yet. The two cups on the top I presume...
California started registering autos in 1905. Owners would get a small brass tag with the registration number on it. This would be attached to the car and the owner would make a larger plate with the number on it to hang on the back of the car. These brass tags we...
Hello-
I have a 1929 Durant 60 Deluxe Roadster for sale. I have recently had a few very fair offers for this car but the interested parties would hack it up and turn it into a hot rod. I would hate to see this happen to this car as there aren't many left so I figu...
I was thinking of the "medical" benefits of Merlot last night when talking about our Eastern Washington wineries. This made me remember the 1930 Durant Limo that is in Walla Walla. I first saw it about 4 years ago when the owner first drove it out of his shop. Lan...
A friend owns a 1917 Dort Touring and I am trying to help him determine the value of it. The car has been in a barn for several years and it is very dirty but body is complete. Interior needs some minor restoration but overall it is in good shape. Car was last dr...
Hi folks:
NOW is the time to register for the 'TWENTIETH ANNUAL DURANT MEET" to be held in Guelph, Ontario June 28 to July 1. Come and join us, camping is FREE in Ed Pringlemeir's back yard. WHAT A BARGAIN!!!! We have a couple of interesting tours lined up and t...
I've added 267 Pictures from the West Coast Spring Fling to the Past Events page in the Photographs section.
Enjoy
Rick
http://www.dmacweb.com/events/PCC2015/index.html
There is a really nice Flint Depot Hack on Ebay # 141658592734. Has it ever been displayed at any of our events? This must be a rare build or did Flint ever build such a vehicle?
At any rate, it would go perfectly with Ed Vomero's stable of beauties!