HI from uk
i have a 1932 619 and am looking for a starting handle for it. have tried ebay and other sites but no luck
would be great if anyone has one for sale
hope to hear from you soon
glen durant
Craig's List for Seattle has the following Star motor for sale with the following description and posting number:
This is what the tag on the side of the block. Star 401754 Made for Durant Motors. Continental Motor Corp. Detroit & Muskegon, Mich.
Also comes wi...
I'm thinking of making a couple new door skins and possibly a rear tub for my touring. I'll need a bead roller to do this correctly, anyone out there with a used bead roller for sale. I'm assuming I'M not the only one crazy enough to try this so any suggestions or he...
Needed for my project. 3 split rims with 6 bolt tabs on each. They measure 4 1/4" wide by 22" diameter and take a 600X20 tire. Typically on mid 20's cars.
Looking for the original equipment front bumper for the 1928 Durant D65 or D75 line. It is the same bumper as the photos under the "Photographs" menu pick under "Durant" of Mike Linthicum's D65 or Larry Fogarazzo's D75. Appreciate any and all leads to locating one.
On my distributor there is no place to hook up the spark advance from the steering column. I wonder if there is a piece missing on my distributor. Does anyone have a diagram of a IAY 4010A 3M.. For a 4 cyl. Durant
I am considering the sale of my parts coupe , a 1929 model 60 with 4 bolt wire wheels . it has 4 complete wheels and a spare with necessary brake drums....complete axle and brakes and wires available for front and rear may be without the rear itself, just wires and b...
HELP--- I need a left front fender for my 1925 Star Touring. Last year Bill Hoagland sent me a LT. & RT. fender but I couldn't save the left one. I can get by on just the inner fndr. the outer part will work. Please look in your scrap pile. Thanks, Glenn
I have decided to sell my Durant Model 60 coupe if anybody in the club is interested. Free shipping with the "Buy it now" on Ebay. It can be found on Minneapolis Craigslist and on Ebay. Thanks Todd
I am in need of the input shaft on the transmission for my 25 Star. It is 6 ¼ inch long. Spline count is 10 and the gear count is 14 Teeth. Would appreciate help with this.
All original. It is a driver, I drive it in Parade's on tours and around town. It has 4 wheel brakes and steel wheels. The body is blue ant thye fenders are black The price is $10,000.00 My eyes are bad so I can't drive i anymre. You can call me at 360 459-7264 or Em...
Looking for windshield wiper motor for my Model 65. Not sure of model number but is probably made by Trico. Member Bill Devries has the same model which appears to be original and he provided the photographs below. Need to find one so check that garage for me. Thanks...
I have two pictures important to the history of Durant motors. Dated 1928 is the first of all the Canadian dealership owners. The second is of all the factory staff at the Toronto location dated 1929.These are for sale
There's a free W8A 4 cylinder engine out here. Does anyone need one? (British Columbia)
I'm trying to help someone save it from being scrapped. I have been told all it's missing is the distributor.
Hi everyone. I am new to this forum but was recommended to go here. I have a good friend who has a 1921 Durant with a 4-cyl motor. He havn´t used his car since 1961 (sold new here in Sweden) and we discovered that the distributor has gone bad. Otherwise the car...
I have a Durant A-22 for sale. The car is in reasonably good shape with a almost new top and side curtains. It runs but does have the wrong engine in it (1924 Star W4). The balance of the car appears to be mostly original. I have a spare W5 engine to go with it - int...
Hey ! Someone out there must have an extra brake pedal with a 5/8 inch round hole on the bottom. I'd prefer one with a diamond tread on the pedal but at this point any design with the 5/8 inch round hole on the bottom will do. I've got two clutch pedals with the diam...
I am missing the latch / handle for my 1928 Durant M2. I don't really know what it looks like, so I don't even know what I am looking for. But here is a picture of the hole.
I also need the brake light cover / lens to cover this:
Sadly, I have to sell my '23 Star Roadster- I am just hitting the wall with major money issues and can't squeeze the time to work on the car. I tried to get her finished but can't. If anyone is interested, let me know- I tossed it on Ebay to see what I can get for it...
http://www.roblins.net/2388/2157.html
Appears Roblins may still have this which was brought in from a saw mill a few years ago.
Roblin's Garage - Classic Auto Salvage
1840 Fish Lake Road (R.R.#2),
Demorestville, Ontario, Canada K0K1W0
(613) 476-5479...
I came across this in Flickr (taken in January)
http://www.flickr.com/photos/ralf_k/8522053267/in/pool-98378256@N00
It says it is at some place called Trust Salvage in Auburn Washington.
(253) 735-6690
14909 SE 326th St, Auburn, WA 98092
Might still be...
I saw a bunch of new stuff go up on ebay, the part are a bit rusted for the most part, but a few I haven't seen in my searches before.
http://www.ebay.com/sch/m.html?_odkw=&item=261138148275&_osacat=0&_ssn=vaainc73&_trksid=p2046732.m570.l1313.TR0.TRC0.Xdurant&_nkw...
I'm on an internet crawl for durant parts so I am posting things I come across in my travels.
http://edmonton.kijiji.ca/c-cars-vehicles-auto-parts-tires-engine-engine-parts-Antique-radiator-W0QQAdIdZ485869989
Clean, old looking rad, they are asking 95$. Not su...
http://www.gumtree.com.au/s-ad/berri/engine-engine-parts-transmission/rugby-vintage-car-motor-red-seal-continental-star-durant/1016959552
Looks like this one has radiator, and starter etc.
Still searching for what I need :).
http://www.ebay.com/itm/1920s-Durant-Star-C-F-Automobile-4-Cyl-Continental-Engine-Motor-W4-Antique-Car-/400346390930?pt=Vintage_Car_Truck_Parts_Accessories&hash=item5d36812192&vxp=mtr
Thought I would post what I come across in my search of parts. Still need a goo...
Here's one back at you Gerald
http://ontario.kijiji.ca/c-cars-vehicles-classic-cars-1928-Durant-Star-W0QQAdIdZ492928592
Kijiji Ontario > Kingston Area > Kingston > cars & vehicles > classic cars > Ad ID 492928592
Date Listed 09-Jun-13
Price $7,000.00...
It's in Ontario I believe, rusty looking but maybe someone out there is looking for one.
http://peterborough.kijiji.ca/c-cars-vehicles-auto-parts-tires-engine-engine-parts-1924-STAR-DURANT-CONTINENTAL-ENGINE-W4-W0QQAdIdZ431927580
I have a Durant Start transmission for sale on ebay.
http://www.ebay.com/itm/161050943174?redirect=mobile
I don't know much about what year or model it's off of, I think it's an M??
We've consigned our "just restored" 1930 Durant 617 coupe to the D.E. Foeller auction in Denver, July 19-20..Pictures can be seen on their webite, www.defoellersales.net. This is the car that was found in an old Western Kansas school house, stored since 1944. (we hav...
We selling items for a large estate in Southeast Iowa that includes several Dorts an Dort parts. Please click on the following link for our web site. If you click on the link below, it will take you directly to the online catalog!
https://www.proxibid.com/asp/Ca...
I HAVE DECIDED TO OFFER MY 1929 "60" SEDAN FOR SALE. PICTURES ARE IN PHOTOGRAPH SECTION OF THIS SITE....I AM ASKING $8500. IT IS NICELY RESTORED AT THE COST OF $15,000 A FEW YEARS AGO....AT THIS MOMENT, IT ONLY NEEDS GAS LINE HOOKED UP...I AM HOPING TO DO THAT SHORTL...
I have a Flint motometer I would like to sell,figured I would try here before ebay. Good condition, will need re nickelling. Asking $350. Can email photos.
I am listing my fathers car for him. Up for sale is his 1932 RS Frontenac. Red body, black fenders with cream wire rims. Rumble seat. An older restoration but still in great condition. $ 38,000. CDN Email for full details and pictures. Thanks for looking. Robert Gow...
For Sale
Parts for 1923 star s/n L-34764
Frame, front and rear axels, rims, cowl, steering sector, engine(s/n 84160) with starter, generator, carbruator. Had been used to power a sawmill. Any reasonable offer.
I'm in need of a brake pedal with diamond plate tread for a single shaft setup and the long rods that go back to the rear drums. Any help would be appreciated and all for a 26/27 Star Touring.
I am after 1 Wheel the external Rim would be enough as I have spokes and hub and also require 4 demountable tyre rims and think there is another word for that. Also tyres if anyone has any.
i have a 1927, that previously i thought to be a 26 but after reviewing the serial number it is a 1927.
here is a link to an old add for pictures
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=261131691147&ssPageName=ADME:L:EOISFP:CA:1123
make an offer, s...
This may sound silly yo ask, but I have tried Autozone, Napa, Farm & Fleet, Advance auto and other random plcces to buy a good stout brake pedal spring. None seem to have one husky enough to return a pedal shaft.
Can anyone recommend a source?
Thanks,
Jim Chocole