Lance Haynes has a large lot of used Durant parts in his backyard.
His property is now in foreclosure.
He’ll give these parts to anybody who can come and get them.
He’s in San Diego, CA 92117.
Otherwise, they’re going to the dump.
He has a...
Going to be a while until I need it, but does anyone have a frame for a 1927 star? Preferably on the east coast of the US. I can repair if necessary but am not super comfortable with doing it for the length I need I'm up too about 36" of the rail being very thin.
I just got back from a parts run to Lancer’s house. I was able to bring back some additional parts that fit 28 to 29 Durant‘s and 1930 to 31 Durant. However I left behind a four-speed transmission, for doors that fit a sedan, for 12 spoke wheels, and a lo...
I needed a new data plate for my early A22. So, I sent out and had a couple made. They are Aluminum, correct size, acid etched and painted with holes Price is 85.00 each, postage paid in Continental US
{img] https://ibb.co/WyQXt3M (/img]
Lewis Mendenhall
Essex...
I have a 1931 614 deluxe. In need of a water pump or any suggestion on what is being done to repair the one I have. I have replaced the bushings but the shaft it shot and the outside threads on the housing are almost gone. Thank you for any help.
I was cleaning up my family's property and found what appears to be Durant Star car. It's basically just the frame which appears to be in great shape and engine. Feel free to reach out with questions.
Does anyone know where I might find a rear main seal cover the sits over the rear main bearing. It's for a '29 Durant W5 4 Cylinder engine. It's made of pot metal. The previous person to dismantle this engine wasn't any too kind to this part - it's got lots of cracks...
1930 Durant Model 6-14 original 50 page glove box Instruction Manual. Penciled in purchase date: March 14, 1930.
License data page for all 6-cylinder Phaeton, Roadster, Sedan, and Coupe models.
Includes tri-fold Durant parts order form, letter to new Durant owners,...
At this weekend's Portland (Oregon) swap meet. 1929 model 66 4-dr 6 wire wheel sedan 6 cylinder, 4 speed. Probably just a parts car. $1200.00 Kelso Washington (60 north of Portland on I-5). 503-498-2539(not sure why this has an Oregon area code). Only has driver's do...
Help - Help - Help
We took our spare 1922 Durant motor to a good rebuilder friend of ours about 3 years ago. He said he had rebabitted the mains & rods and so I paid him. Then he was going to rebuild the engine for me. I had bought a rebuild kit (Pistons, Rods & Bea...
Hi Folks:
I have just been in tough with a chap from Maryland, whose father has quite a supply of Early Durant parts that he would just love to get rid of. Knowing that the East Coast Durant group are meeting in Maryland on May 4 - 7, I felt someone, maybe Don Schil...
1. 2 - refurbished wooden spoked rims from 1927-28 Durants. One with 4.75/500 x 19 new tire and tube. $300 for both.
2. 3 hone-comb radiators from 1927-28 Durants. All appear to be in great shape - $250 for all 3.
Lance Haynes has a lot of miscellaneous Durant parts in his back yard that he needs to get rid of because of health reasons. I am trying to help him in this effort. Any offers will be considered.
He also has lots of Durant literature available.
For more details,...
A 1924 Star Model C Touring car is for sale on auction by a dealer on Hemmings. It is in Sudbury, Ontario. Current bid is $3,500, reserve has not been met, and the on-line auction goes for another 10 days. Reference # 1924-star-other-sudbury-on-912518 on Hemmings sit...
Hello. Does anyone have a spare wheel for sale for the 1925 Durant Star? Shipping to New Jersey in the US
Alternatively, where can I buy such a wheel?
Kris
Can't find front neoprene wheel bearing seals for my 1926 Star. Going to have to use original felts, but have lost the steel felt retainers. Need both sides. (2 pieces each side ). Help!
Homemade Tractor with a Geneva Adapto Tractor Kit. Built and modifications done in the late 1930's. COWL Model NE 8027, 1923 motor W4 #4130XX. Restored in 1975 and always stored inside. Slow speed and neat old tractor. Extra parts included, clutch plate, parts carb....
I have a 9 inch Bausch and Lomb STAR headlight lens. perfect shape. I had an offer of $45 but person said I could get maybe $60 on this forum. Call Gary at 408-482-9933 noon till 8 pm except sunday. i live in San jose. thanks.
Hello and welcome
I just bought my 1925 Star Durant Model F and am looking for a radiator emblem (1925) and Moto Meter Hood Ornament. Maybe some of you have these parts. I will be grateful for the information. Chris
For Sale: 3 Durant radiator emblems 1. Bronze $100 2. Silver $60 3. $15
For Sale: 2 Durant Re-chromed bumper fastener emblems $100 each
Email: rose.dennis@shaw.ca for photos
Wanted! Trico vacuum operated windshield wiper motor for my 1928 Model 65 Durant 4 door sedan. When I purchased my car the car had an aftermarket one rigged to the windshield frame. I'm probably sure that one from an M-2 or M-4 would work though. Can't imagine that m...
For Sale? I have collected 2 Dort Touring cars and in addition a magnitude of Dort spares parts, engines, electrical, wheels and much more. One is fairly complete minus top bows and the other is more of a parts car. I am thinking of liquidating them for parts or givi...
For Sale: Oil Filtrator Housing Gasket for 14L, 15L and 15U Continental 6 cylinder engines. P/N 24026 is a replacement seal with a square cross section to fit the base of the Oil Filtrator. $2 each plus S & H. Contact Phil Peters, 6430 SW Roundtree Court, Portland, O...
Some (mostly) 6-14(and whatever else it might fit--ask Norm Toone), sheet metal. I'd say it's rare, but isn't all of it? 1.Left front fender(non-welled) 2.Right rear coupe/roadster fender 3.Right coupe/roadster quarter panel 4. Rear apron over fuel tank 5. Cowl secti...
I have 4 Star or Durant rear fenders, presumed to be 1924-6? Two left, two right. Some were purported to be NOS. I have had them for 30+ years but my car is long gone. They have been buried in climate controlled storage since 2007 and in my garage before that. $300 e...
My father has what appears to be a 1930 614 coupe, serial #5002 that he is wishing to part with after nearly 60 years. It was running when he parked it in 1966. Everything original is there except a couple fasteners. It needs a full restoration but the car is complet...
Just left the work bench and discovered that I'm missing two tabs which fit in the slots in the plated rims. These slots are in line with the tabs which are riveted in the bottom of the drum housings. Rims were plated 40 years ago and the plater probably lost the tab...
Fellow gearheads
Purchased from Reg Bent's auction July 2022 in Napanee Ontario Canada is his last Durant project car. Normally I am a 1934 Ford guy and have been chasing a roadster for some time now from an elderly gent. Up until I brought the Durant home he was n...
I need several door handles for my 1928 Durant Model 65 4 door sedan like those pictured below. The car came with two that are in so so shape, I need at least two more, but would buy more if I can find them. Check you garage and see what you have. Let me know.
Make offer on a 1930 Durant parts car . Has title and is completely disassembled and would need to be trailered. Engine, transmission, frame, wheels, fenders , complete chassis , hood, radiator shell and radiator.
No body except the cowl and windshield. Good useable...
Anyone looking for a bumper like this with the two D medallions ? It was on a 1930 Dodge DC 8 but the correct bumper was found.
Norm
Do you know anyone that needs a front bumper?
Michael Marsilio .... michael.marsilio@yahoo.com
You can make arrangements...