My early A-22 Durant developed a bad manifold. So I went to my spare motor and the manifold set on it has an itteprable crack. So, I need a good one. This is the early 4 cyl manifold...the one with the vacuume tank mount on the tube. Can you help me out?
Th...
Hello,
Doing some work on my car and the turn signals look like they came from Harbor Freight. Looking for a set to purchase and install. I'm sure they were the same for a couple of years I will be at Hershey this weekend but would like to ask all of you first.
A...
1928 Durant Sedan - restored for about 100'000$ (swiss labor is VERY expensive) . .
Was driven regularly till about 2 years ago - since then stored in dry garage
Pictures are abailable
Any interest for such a car in Europe?
Thanks
Where Are You From? S...
1928 Durant Sedan - restored for about 100'000$ (swiss labor is VERY expensive) . .
Was driven regularly till about 2 years ago - since then stored in dry garage
Pictures are abailable
Any interest for such a car in Europe?
Thanks
I am in need of a fan drive pulley for an 22A engine. I need the whole assembly which would include the fan, pully and nut assembly. Give me a call if you have an extra one. Thanks, Phil 503-244-1608
This 1927 STAR was built in Oakland, California and was rebodied as a Depot Hack probably at least 50 years ago. Rust free chassis, original running gear, honeycomb radiator. Seats 7 people. Four cylinder Continental engine runs great, carries great oil pressure and...
I acquired a ROUGH Rugby truck this week
Need all of the rim clamps. Wood framed doors in salvagable condition.And someone who could look at my pictures and tell me what I have or don't have.
THANKS!
Dave
Hi all, thought I would throw it out there just in case. I am working on a 1928 Durant M-2 Sedan for a member and the passenger rear door had been hit in some previous accident and the lower section replaced with a poor patch panel. The rebuild went okay but the pane...
I found this on Craigs list.
1925 Flint in the Dublin/Livermore area, California
Rick
https://sfbay.craigslist.org/eby/cto/d/1925-flint-not-ford-chevy-automobile/6963209831.html
What's the chance that one of you fine folks have an extra key for the early Durant cars? I have one good original Connecticut T&E logo key, but having only one of anything makes me nervous. I could probably make a functional key from scratch, but would prefer an o...
I'm looking for one small clip that tightens the headlight lens to its housing.
The part is only 1" long by 1/2" wide, would you have one?
This is for my 619 but they were used on the 1931-31 models 614 and 407 as well.
Rick
Durant 4 cylinder built locally in Leaside, Ontario.
48,732 miles.
An original car with mostly original paint.
Runs, drives and stops very well.
Good rubber, good chrome, excellent original interior.
Has brand new correct chrome hood ornament.
Always stor...
There is a 1924 star Model F roadster for sale on the Bring-a- trailer website. A video is included of the car running down the road--looks nice! Vehicle is in California.
Was wondering if anyone had or knows a source for headlamp lenses? I have a '24 Flint that has a broken one. Saw some on EBAY that looked like they would fit and was wondering if the Chevrolet or Ford 9 1/2 inch lenses would work? I am an absolute neophyte with these...
I have a 28 Durant parts car that I got and am not needing so I was seeing if anyone would be interested in it please let me know I don't have a title but there is a VIN tag thanks
I have completely restored my 1929 Durant Model 40 with a rebuilt W5 engine, new paint, interior, glass, roof, and tires. All bright metal has been rechromed. It has a new tube rad which is covered with a layer of honeycomb as well as a new Zenith carb and air filter...
I have 1924 star radiator for sale with a modern core only used for 5 months before replace with honeycomb style asking 600 dollars plus shipping contact jquicksell@tampabay.rr.com
To any member(s) with interest in a DeVaux, Ebay just listed a 1931 DeVaux 6-75 Sport Coupe at $18,500.00/obo. This doesn't belong to myself or any one I know.
I am in need of either a complete starter or complete Bendex drive for my starter. Unfortunately the tag is missing off my starter so I don't know which Autolite starter I have. Engine is the 14L. If anyone knows of another make, model, or brand of starter that can b...
I am looking for a steering gear box for a '29 D-60. Probably the same box as for 4 cylinder and other 1928 and newer gear boxes. Can compare with photos to make sure will fit. Rebuild-able (or already rebuilt) Must find one soon so that my coupe will be safely drive...
Hello all,
I have these two wheels I took from my grandfathers farm years ago. I believe they are Durant wheels. I hate to just throw them away, maybe someone here would like them? They appear to be solid, however one has a bit heavier rust than the other on the r...
We just stripped the teeth of the pinion in our 1929 Durant Model 60.
We would like to get some rear end parts that are in very good condition so we can get this car up and running on the road again.
From last weekend's Portland (OR) swap meet. Some hard to find hubcaps in a booth there. Dort Flint, Durant and of course Star.sales@hagenautoparts.com Brandon Berquest.These were not his but he knows how to contact the seller
Hello everyone,does anyone have a fuel pump for a 31 or 32 devaux,I just need a rebuildable ,core the .devaux I purchased recently has an electric with a block off plate,I would like to put the original pump and use the electric for a ,backup I the original I believe...
Robin Baker found this add in Ajax, Canada (near Toronto) for Star fenders and radiator shell.
https://www.kijiji.ca/v-classic-cars/city-of-toronto/1926-28-star-fenders/1419626893?siteLocale=en_CA
Hello,
My father has a Durant he is looking to sell. COPD has gotten the better of him so he isn't going to restore the car. He would like to sell it to some one who will. He is worried about it being turned into a Rat Rod. He has is advertised on Hemmings. Link i...
A Durant sedan turned up on Craigslist right here in my own backyard and I was not aware of it! Anyways I looked at it this morning. It's a '29 D60 Sedan, all original survivor. The pics on Craigslist are several years old. After the pictures were taken it was parked...
Good morning. We have a 1925 sport touring star. We are looking for a starter,starter pinion, hand spark and throttle control handles and gas cap. any help would be appreciated. Also this car had come with top saddles , but no hole in the car for them. Do they belong...
I am happy to announce that Tom Edmonds has purchased the "barn find" of my Durant
parts. If any fellow Durantonians need a part perhaps Tom can help you out!
Hmmm, Mary D is north of Gettysburg.
Hey, Tom- get ready for the calls! And thanks for helping me out.
Durant parts for sale.
I have a collection of parts left over from my father's (Ray Keto) restoration of his 1923 Durant Sport Touring. These parts have been carted from Rockville, MD to Greencastle, PA to Smithsburg, Md. and it is time to let them go!
Includes...
A Houston area Star Car dealership opened in the 1920's. Later in the 1920's he became a Chrysler dealer and closed in 1965. I stumbled upon the dealership in 1970 but nothing was for sale. After 48 years and 4 generations of ownership I purchased the dealership inve...
1923?? Durant 4 cylinder engine with transmission, starter, generator and driveshaft. Engine turns over. $500 takes it all. Phone calls only 508-677-7554 or 781-447-6008 visit:
https://boston.craigslist.org/sob/pts/d/whitman-1923-durant-motor-and/6809218690.html...
Today I made the plans to move to a retirement home. This means I have to sell my 32 DeVaux. Needless to say, I regret that the time has come to do this.
Since I got it from Myron's estate I have enjoyed knowing this is the only 32 Standard sedan known. It is a co...
Perhaps someone else might benefit from this mail. I asked what years and commented lads looking for parts 1922 to 1934 but got no reply ?
Hello,
i was wondering if you know of anyone in the Ottawa area that might be interested in some Durant/Star parts i have....
I have sold my D66 however the new owner found a broken king pin and subsequently broken springs in each end of the link. Also a thinner spring in the associated ball connection. The King pin has been repaired as I had one from a pair bought many years ago. Dimension...