My father has a 1928 Durant Sedan Star, 4 cylinder restored by Rumble Seat Restoration, burgundy with black fenders and a gray cloth interior, garage kept. asking $12000.00 Canadian
If you have any questions don't hesitate to contact me, George at 1.604.302.4941
I have some body parts for a 1929 Durant D-60 4 door sedan I would like to sell. I have the cowl, 4 doors, door striker pieces, windshield frame, and many miscellaneous pieces. Metal is in very good shape and a lot of the wood is still intact. $1200 obo for all OBO....
I have a 1930 Durant Model 407 that has been in our family for over 60 years. It is not restored. It does run and drive good and I have a good title for it.
Please serious inquires only.
208-310-0151
https://goo.gl/photos/CMy91CYWSMFQ41gV9
Go to this link...
I need an interior door handle for rear door.
Thank you
http://photobucket.com/gallery/user/ajax0073/media/cGF0aDovSU1HXzYxMjlfenBzODhiYmVuZ2kuanBn/?ref=1
1923 Star "Depot Hack" project needs a new home and a few parts here and there. Elderly gentleman can go no farther and wishes it to go to someone who can enjoy it. Located in Murfreesboro, Tn. If I had room in my shop I would be in Tennessee rat now!
A bargain for...
Hi there.
I have 3 old bumpers from durants. Don't need them but don't want to send to scrap either. Need refinishing. $50 for all three of anyone interested. Please let you community know. Have picks if interested.
Clint Hiebert
cjhiebert@icloud.com
I am looking for two sets of shackles for the rear springs on my 29 D-60 Coupe. I also need the two pins that are pressed into the spring I hear they are hard to find so may have to have them machined.
If anyone has two good sets of shackles or know of another fix p...
Anyone got a good gas tank for my 1927 Star Frame? I thought I had one but went to install it and nope mines too long and too wide and the filler neck slants the wrong way. Frame width at the front of the tank area is 35 1/2 inches and the tank compartment is just sh...
I have to pull the oil pan again . Got a bad leak and have to stop it some way. Gonna try once more to pack the rear seals and hope that it will work. The car is finally running and I sure want to take it out to show it off a bit before I give it to my Grandson....
1930 Durant 614 DeLuxe. This one runs great, we just take it for a drive for the occasional. Very nice straight car, ready for its next owner. Comes with some parts, and all sorts of memorabilia.... pictures, dealer sign, magazine ads.
Asking $19,900 CDN$ or $14,9...
I have an old Carter DR-0 brass bowl carb that I believe is correct for 1925 and 26 Flint. For sale for $100 plus shipping. Can provide pictures or you can look on my face book page "Antique and Vintage Car Parts"
Star 4 cylinder motor with flywheel, clutch, radiator and radiator housing for sale. Serial number is 53267, reportedly from a 1927. Appears to be all there with distributor, coil, starter, etc.. Radiator has a “Six” emblem so not from the same car origin...
Posting this for a friend...
For Sale
1928 Durant Model M2 Rideau 4 door sedan – 55,980 miles
Built in Leaside, Ontario. Original Victoria car. Vintage plate #200
4 cylinder Continental engine was running when purchased in 1996.
Have complete engine g...
About ten years ago I bought my Durant, planning on restoring it.I haven't found the time to even start on it , and now health issues are making me want to sell the ol girl.I have had tons of interest in it but without a registration/title , no buyers.Is there a way...
The starter on my star car isn't returning the gear back into position. It gets stuck on the flywheel. I've taken apart the starter and everything looks good. Is there something I may have missed ? Also are there any other starters that would work ? Also the gear is...
I will be at our annual September meet in Orilla, Ontario and plan on bringing lots of the many spare parts that I have for 1927 - 1929 Durants. If you need any of the larger items such as motors, transmissions, rearends, hoods, radiators etc.. Let me know and I'll...
Anybody have a nice standard W4 piston? Jan Arnet is needing one for the Continental engine in his Moon. I don't have anything loose at the moment without dismantling an engine.
I have parts available from a spare Durrant salvage by my grandfather years ago. Looking to find them good homes. Let me know if it's anything useful to you. Will try to upload pictures
I have parts available from a spare Durrant salvage by my grandfather years ago. Looking to find them good homes. Let me know if it's anything useful to you. Will try to upload pictures
I still have the 20 inch wheels for sale and they can come with the hubs and brake drums or anyway you might want them. Also have one 20" tire and tube that's for sale. Make an offer as I just need to get rid of them . Dave
Looking for roof wood patterns if available , pictures or any information that could be helpful. Trying to restore to original condition, the roof has been modified in past so I have no useful wood pattern. This M2 4 door has what some call a leather back rear roof t...
Have 4 - 20 inch wood wheels with good wood I'd like to sell so's I can finish my 21 inch wheels. I need to keep the brake drums off the rear wheels though as I have no drums (unless some one has some spare drums for sale) Dave
Hello folks: I recently returned home from a three Iraq tour as many of us coming home I got diagnosed with PTSD.I don't like the medication so I am restoring this truck as therapy along with some meds. I had never heard of the Durant enterprise as he pursued the Ame...
1926 Star speedster for sale. Listed on ebay, but also has a writeup on the "Bringatrailer" website(it's hit the big time). Interesting to read the comments on the BAT site. Price is $7500.00. I have no association with this car, just looked kind of interesting. Ross
For Sale two 1921-26 Durant universal joint discs models A-22,4 cylinder,and B-22,6 cylinder. Price $40.00 plus shipping. mribbich@wi.rr.com or 1-262-3922989 Thanks!!!
Marv.
Greetings:
My late father was a member of the Durant Family Registry and our family still owns his 1930 Durant Sedan, which I am hoping one day I will be able to restore. Dad passed away in 2008 and Mom is finally going through his things, some of which are the p...
I know this is a long shot, but if anyone has an extra/duplicate Durant Motors sign, I am very interested in hanging one in my little shop. Condition is NOT important to me, nor is the year of the sign. I have a Star sign, but would really like to have a Durant one...
http://kansascity.craigslist.org/cto/5901862009.html
Asking $6,000 Complete car, motor free, needs restored, 4 door, wood bad, title missing. Only serious inquiries. I do not text or email, phone calls only. Will return calls daily after 3 pm. (641) 814-3097
I have a real nice set of 5 Devaux hubcaps for sale. Asking $250 plus shipping.
I also have 2 perfect Devaix Stabelite headlight lenses for sale. Asking $150 plus shipping. email me if interested at jaxmurphys@aol.com
Thanks,
Dennis
I received in todays mail a very pleasant surprise. When I was restoring my 1926 Star I advertised for suitable cowl lights in our Provincial Car Club Magazine. I received a pair from a gentleman I first met 46 years ago, both of us being Amateur (Ham) radio operat...
Curious as to the purpose of the vertical 3/8" square recesses in the top of the doors above the door handles.
Thank you in advance for any information
I need a 4 bladed fan for my 24 Flint. The mounting holes are 1 3/8" center to center and has 4 mounting holes.
It doesn't have to be a Flint fan as long as the mounting holes are 1 3/8" apart. Email or give me a call at 252-777-1191.
Yates
Early Star front axle with springs, spindles and hubs.
Axle is straight but has rust pitting. Was used for a trailer.
Free to a good home - Pickup only in Scituate, RI
No Shipping.
401-447-999zero from 9AM to 10PM eastern time.
I have a newly made piece of wood that goes under the rear seat across the rear of the car on the floor. $70 plus shipping. Email for photos.
Thanks,
Dave
NEED LEFT SIDE STEERING ARM FOR 1926 STAR.PHOTOS ARE OF RIGHT SIDE ARM. THIS ARM CONNECTS SPINDLE TO TIE ROD.THANKS LLOYD 715-257-7946
%%bbCodeItem_1%%
%%bbCodeItem_2%%
Does anyone have this arm? This arm goes between the spindle and the tie rods. Does not have orientation spur. I have photos of the other side. Does have a stop spur on top.