Hi I have a Durant 60 phaeton number T- 5633 appears to have been build in Canada. the car is in a lovely condition and runs very well. I live in South Africa, the car is in South Africa and am willing to assist with shipping. Im wanting 25000 USD. I can email photos...
Hi I have 2 A22 tourers one partially dismantled and one fully dismantled and I am wondering if anyone is interested in these cars
I have a few vary rare parts eg, set of hayes wire wheels and diff for an A22 I believe were custom ordered for a doctors car here in...
I was asked by a friend if I would broker a deal for him, as he has no computer and is not a member, so here goes. He has a large hoard of Star parts mostly 1924, 1925 and 1926 and looking to sell them all as one lot and is taking offers.
1 1925 frame
1 1924 comple...
I have a roadster for sale, I am not sure if it is a 26 or 27 star car. I have several pictures of this car and I am willing to take more if needed. The car is mostly complete except for running boards (both) and 2 wheels one of each and the folding top. call me at 9...
I have a set of four cast-aluminum running board step plates. Based on a review by Dave Schulte, they belong to 1923 models. They are in very good condition. Our family collects Packards, so these are of no use to us.
Please let me know if you would like to see phot...
For sale: front axle with two disk wheels that have 4-bolt demountable rims for 20" tires. The axle and wheels came off of my 1925 Star. Everything is in fairly good shape except the rims, which are pitted and have rust holes. Price: best offer.
David Egolf
(208) 3...
My 1925 Star has 4.40-4.50 x 20” tires on disk wheels. I’m looking for two used tires of that size. The tires need not hold air, as the car is on blocks and is for display purposes only. However, the old rubber but must still be pliable enough to be mount...
For sale 1929 Durant 6-63 Deluxe Phaeton fully restored. Continental 15-L engine. Restoration pictures can be seen in the club member car photographs, and I can send many additional others by e-mail. Contact me via e-mail at jblasco@unizar.es
Car located in Spain....
Hi Fellow Members,
I have for sale two Durant Hub Caps(Grease Caps) that fit 1928/29 Durants.
They are in good condition are are originals. I have been lucky enough to secure two original rugby hub caps. Asking price is US$160.00 pair plus postage. Also have chassi...
I'm looking for the choke,throttle, lights and ignition advance knobs specific to a 31 Durant. I've never seen what they actually look like,but I believe that they are square. Even pattern pieces would be welcomed. Re. Running board trim.Has anyone had any luck conta...
I got a call from a fellow in Tennessee the other day about this car for sale.A 1930 model 4-07 4 door sedan, built in Canada, wood spoke wheels. Out of a long term storage. He reports it to be in good overall shape with the fenders needing some repair. His name and...
I have a '28 Model 65 Rumble Seat Coupe that I've owned for a few years. I bought the car from the grandson of the original owner. It was restored in the 1980's but it seems to have held up well. The car runs and drives well and has good (not excellent) paint and i...
I haven't a clue where to find this. I have been searching around forums and looking at pictures. I would like to get the setup to hook up the spark advance (which has a lever at the end of the steering column) to the distributor, which is on the opposite side of t...
Part Wanted Durant A22. The existing lower windscreen frame for my A22 Durant has some rust and is unfit to be re-chromed. I am seeking a replacement frame in good condition.
I SPOKE TO A MAN WHO HAS A MODEL 60 DRIVE TRAIN AND FRONT FENDERS AND SET OF WHEELS IN GOOD CONDITION...PLUS MAYBE A FEW MORE ITEMS....NO BODY..HE IS ASKING ABOUT $2200....CALL IF INTERESTED...HE IS IN NASHVILLE TENN...AREA...45 MILES AWAY.....
TOM WILLS
615-975-...
I'm looking at this Durant for sale about 11 hours away from me that is going to need to have a new roof put in it. The current owner tells me that he has the old ribs to use to install the roof. How hard of a job is it and how easy will it be to find period correct...
Really moving along on my A-22 engine project, and now working on my water pump. I have a new shaft and a friendly machinist to help me install it, but my impeller is showing tremendous wear. Does anyone know of another type of impeller that might work or have an ext...
Hello all and happy holidays to you:
I am not currently a member but plan to be one soon. I am searching for a Durant to purchase. I would be interested in a 6 cylinder, four door model from 1930 and later. I had rather have an original not restored model and am not...
There's a friendly fella up in Gering, Nebraska that is settling his father's estate including two 1926 Stars: a roadster and a coupe. Here is the link to his Craigslist posting:
http://scottsbluff.craigslist.org/cto/4720563815.html.
He also has a number of p...
Hi All,
Needing windshield molding for my model 40 coupe and am wondering what others are using for this molding? The windshield has like a "T" slot around the parimeter that the molding would slide into, I think that just about any 1928-1929 model closed cars...
I just talked to a man that has a 29 Deluxe rumble seat coupe for sale on E-bay. He is local and I will take a look at it Wed. or Thur. It is a older restoration but looks to be well done. His number is 253-864-0704.
Gary
1920's Star Landau Sedan very complete. Needs wood, interior, and top. Last started in '2009. Pictures are available, send me an e-mail address.
Make offer!
602-741-6037
Pulled a wheel and partial front axle out of a scrap pile in Eastern Washington.
Noticed the Star emblem on the cap and figured someone might be looking for one of these, or know of someone who might be.
Contact me by e-mail and I'll send you some pics.
Make...
Anyone have a hot tip on where to find a ring gear for my 1923 A-22? Or a part number perhaps? Does anyone know of another application possibly using the same ring?
I am bringing a few parts to n.carolina to sell hopefully...I have...
set of 4 backing plates complete for 1929 model 60 coupe...
steering column ..and box ..1929 60 coupe
a star motor for Ralphie..if he changes mind, its available..
star trans for 1924.....
1923 Star 4 C - dr sedan for sale.
New paint (no body repairs)
new interior
new top
new running boards
new brakes
new tires + extra
step plates
Star motometer
extra radiator,generator,clutch,hub caps,extra gauges,Stewart Warner odometer,more
2 extra W-4 e...
Hello:
I have a line on a 1932 Frontenac Deluxe sedan for sale. This car has beeen owned by the same family for over 40 years that I know of. I understand it is disasembled, the engine has been rebuilt and the chap has many extra parts he has accumulated. This ca...
have a 1927 Star R Sedan runs great, over 5600 in the motor alone. Has been gruaged for the last 27 years and babied. I have all complete parts, many 2 of everything. I have complete sets of books on the car. Will need the seat recovered, and painted. But the...
Looking for a cover plate that goes on the Bell Housing on my model 15L engine that covers the starter spring area. Small contoured piece with two screw holes, probably the same as the 14L and possible other Continental motors. If I can't find one, I'll probably make...
Wanted for the restoration of my 1927 Star Touring but 1924,25 or 26 probably will work.
1 right side door latch
3 recessed striker plates
4 outside door handles
any seat spring measurements
Steering column to dash brackets
Spark advance and speed control lever...
Hi friends I am looking for the windshield wheather strip,the felt holders for six windows inside the doors,hood latches,hood lace. The car has a compleat restoration and is in a finishing progress. Thank you for the help.
For sale is a collection of Star parts. Included are gauges, switch parts, fenders, splash aprons, headlights, lenses, wheels, manuals, other literature, hub puller, generators, starters, engines, an old Chevy dist. that can be made to work on a Star, gas tank, mica...
I'm restoring a 1925 Star that has 20" disk wheels with 4-bolt demountable rims. The bolt spacing across the diameter of the rims is 18". Unfortunately, two of the rims are so rusted they look like swiss cheese.
I recently attended a nearby farm auction and mista...
I recently acquired what appears to be a cast steel bumper guard/emblem. It is roughly 4 inches wide by 10 inches tall by 1/2 inch thick and has five holes in the top (one is a 5-point star-shaped hole that is about 1-1/2 inches tall). It also has three bolt holes in...
I have a set of 4 1929 hubcaps for wood wheels. These are the small diameter ones with the 2 and 1/4 threaded opening. I got them back before I realized that there were 2 different sizes, and they are too small for the hubs on my car . One is in excellent condition...
I have a Star-powered Doodlebug tractor for sale
It is quite a piece! Made from a variety of vintage
car parts. It has a built-on sickle mower that
the builder used for mowing his driveway.
Good item to take to vintage farm shows. Demonstrates
the kind of t...