would like to sell a 1925 Star Coupster it's , or I would say all there or 90%, has had a rebuilt engine and ran , but has been sitting for YEARS , car will need rebuilt , if interested get back to me , I can send pictures, selling for a old guy he's moving and woul...
For Sale: Parting out 4 cylinder W4 and 6 cylinder 14L engines. Both turn over by hand. Write or call for needs. Contact Phil Peters, 6430 SW Roundtree Court, Portland, OR 97219, 503-244-1608, pjtpeters@aol.com
Still need these parts and the parts numbers are from the 1929 repair/parts list, Durant and Star Cars.
one door lock/latch Right Side # 23142
three door striker plates #20328
4 door handles # 23371
one steering column to dash bracket # 23513
Plus I still need...
Hi all,
I am cleaning out grandpa's shop and found great Durant star hub cap / dust cover that is for sale. Here are a few specifics:
*Excellent condition with some surface blemishes
*Inside diameter is ~ 2.5"
*Height is ~ 2"
*Threaded on the inside
*No ru...
The previous owner cut the middle passenger side running board bracket off with a torch. I would rather work with an original one then scratch build the missing portion. I think the 4 forward running supports are similar enough to work for my needs.
Please let...
I have for sale a newly & professonally rebuilt, generator off a 1929 durant 6 cylinder engine that I cannot use. If anyones interested this is a good one so e-mail me.
I am looking for one of two things.
Here is the situation: I have four 23" split rims on my A22 with good 31x4 tires mounted. I have two 23" clincher style spare rims, but they have old, unsafe 30x3/12 tires on them. I don't think it's a good idea to run two d...
The body ID plate for my Rugby was beyond useable. I couldn't find a suitable one, so I reproduced it by laser etch onto 1mm aluminium. I have a couple of spare additional ones if any other Rugby owners are after one. A$30 + postage.
Cheers
Shane
I talked with Jeff Von Rosenberg yesterday. He is building a racecar and has decided to sell his 1926 Star Coupester. It is mostly unmolested original except for the opening for the trunk has been cut to accommodate a pickup bed back during WWII.
Give him a holler a...
I still haven't had any luck finding a new or NOS king pin set for my '29 Durant Model 60 4-Dr. sedan.
Looks like we might have to have someone make some replacement parts for us.
Does anyone know where someone does this at a reasonable price?
Any help would be ap...
hi community,
I wanted to announce the sale of my 1926 parts car to the members in case any one was looking for a good star to build or to have all the parts they need!
heres a link to the auction
http://www.ebay.com/itm/261127353108?item=261127353108&viewit...
I came across another 1926 Star Coupe project on Craigslist up in Lewiston, Idaho. It belongs to Rick who used to drive it as a kit when his grandpa owned it. His asking price is a bit elevated but maybe a deal can be reached. He wanted to give it to his daughter but...
I am restoring a 1925 or '26 (not sure yet) Star Roadster and am running into parts needs (carburetor rebuild, distributor connecting rod, etc)- can anyone point me to a supplier or source?
Thanks,
Jim
I realized recently the parts for my bumper were not to be found with my car. The bumper on the back is very similar to the style of the bumper on the 1929 Durant rather than the 28. I think it's most likely this did come with a 29 bumper as this car was near the e...
Hey Guys, I just got my copy of Mac's 28-31 Model A catalog for 2013. Lots of good Durant and Star parts hidden away if you know what your looking for. Ford didn't make everything for their cars and did a lot of outsourcing on many items. Check out the windshield wip...
Hello Community
i wanted to let people know a good parts car is for sale with a realistic reserve!
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=261221115583
thanks!
Any or partial pieces needed for my Roadster. I have the trunk lid but am missing the springs and hinge.
Thank you for taking the time to read this!
Have a safe and prosperous new year!
Bill
Does anyone knows where to find the transmission sheilded ball bearing set main shaft / drive gear for a 1926 star r six? Also does anyone knows if the ones from ford a model works?
Thank u
Is there any interest in replacement float bowl lids / covers for the early Durant and Star brass Tillotson carburetors? I had a fellow tooled up to make a replacement aluminum lid for my severely degraded pot metal one. It came out very nice and I thought there mi...
1929 Durant, bought and garage stored in 1970s, now dad wants to sell. Never driven, but the engine turns.
Body is in excellent condition. Have the title. Pictures available. Would like to find this beautiful car a good home.
Make an offer. Lynn Cherry in OKC...
I am new to this site, and ask for your help. I need a gas cap to fit a 1928 Durant M2. A Used gas cap would be fine. Or, if someone has, or knows if there is a source for new gas cap that will work, I would appreciate it. Does not have to be a fancy cap with a le...
There is an auction in Owosso Mi on Sat 10/26 with two Star engines for sale if anyone is interested the website is:
http://narhiauctions.auctionflex.com/showpreview.ap?co=14768&weid=36986&weiid=0&archive=n&pagenum=1&lang=En:
HI from uk
i have a 1932 619 and am looking for a starting handle for it. have tried ebay and other sites but no luck
would be great if anyone has one for sale
hope to hear from you soon
glen durant
Craig's List for Seattle has the following Star motor for sale with the following description and posting number:
This is what the tag on the side of the block. Star 401754 Made for Durant Motors. Continental Motor Corp. Detroit & Muskegon, Mich.
Also comes wi...
I'm thinking of making a couple new door skins and possibly a rear tub for my touring. I'll need a bead roller to do this correctly, anyone out there with a used bead roller for sale. I'm assuming I'M not the only one crazy enough to try this so any suggestions or he...
Needed for my project. 3 split rims with 6 bolt tabs on each. They measure 4 1/4" wide by 22" diameter and take a 600X20 tire. Typically on mid 20's cars.
Looking for the original equipment front bumper for the 1928 Durant D65 or D75 line. It is the same bumper as the photos under the "Photographs" menu pick under "Durant" of Mike Linthicum's D65 or Larry Fogarazzo's D75. Appreciate any and all leads to locating one.
On my distributor there is no place to hook up the spark advance from the steering column. I wonder if there is a piece missing on my distributor. Does anyone have a diagram of a IAY 4010A 3M.. For a 4 cyl. Durant
I am considering the sale of my parts coupe , a 1929 model 60 with 4 bolt wire wheels . it has 4 complete wheels and a spare with necessary brake drums....complete axle and brakes and wires available for front and rear may be without the rear itself, just wires and b...
HELP--- I need a left front fender for my 1925 Star Touring. Last year Bill Hoagland sent me a LT. & RT. fender but I couldn't save the left one. I can get by on just the inner fndr. the outer part will work. Please look in your scrap pile. Thanks, Glenn
I have decided to sell my Durant Model 60 coupe if anybody in the club is interested. Free shipping with the "Buy it now" on Ebay. It can be found on Minneapolis Craigslist and on Ebay. Thanks Todd
I am in need of the input shaft on the transmission for my 25 Star. It is 6 ¼ inch long. Spline count is 10 and the gear count is 14 Teeth. Would appreciate help with this.
All original. It is a driver, I drive it in Parade's on tours and around town. It has 4 wheel brakes and steel wheels. The body is blue ant thye fenders are black The price is $10,000.00 My eyes are bad so I can't drive i anymre. You can call me at 360 459-7264 or Em...
Looking for windshield wiper motor for my Model 65. Not sure of model number but is probably made by Trico. Member Bill Devries has the same model which appears to be original and he provided the photographs below. Need to find one so check that garage for me. Thanks...
I have two pictures important to the history of Durant motors. Dated 1928 is the first of all the Canadian dealership owners. The second is of all the factory staff at the Toronto location dated 1929.These are for sale
There's a free W8A 4 cylinder engine out here. Does anyone need one? (British Columbia)
I'm trying to help someone save it from being scrapped. I have been told all it's missing is the distributor.
Hi everyone. I am new to this forum but was recommended to go here. I have a good friend who has a 1921 Durant with a 4-cyl motor. He havn´t used his car since 1961 (sold new here in Sweden) and we discovered that the distributor has gone bad. Otherwise the car...
I have a Durant A-22 for sale. The car is in reasonably good shape with a almost new top and side curtains. It runs but does have the wrong engine in it (1924 Star W4). The balance of the car appears to be mostly original. I have a spare W5 engine to go with it - int...
Hey ! Someone out there must have an extra brake pedal with a 5/8 inch round hole on the bottom. I'd prefer one with a diamond tread on the pedal but at this point any design with the 5/8 inch round hole on the bottom will do. I've got two clutch pedals with the diam...