A W4 Star on the plate, motor, block,crank, rods, flywheel, manifold, water pump, generator, head, clutch for $75 and a W5 Durant on the plate, block with crank, rods, ground cam for high lift, generator, for $50. Photos available.
Original copy of "I want to drive a Durant". Minor damage to upper right corner. $50 plus postage. Email for scan of cover.
Dave Schulte
14476 Dodgeville Rd.
Sperry, Iowa 52650
schulte3@mepotelco.net
I have in my possession a brochure from a dealership that sold star cars....lists the difftent models...and feb pricing... also on back had motor and chassis overviews..anybody interestrd in this. Contact me
I talked with Dane Perez about his Fathers Star Touring and he sent a few pics. It has been modified with a Ford 4 cyl OHV engine, two speed auto trans, and a '70 or so International rear axle. It is still using the wood spoke wheels but has rear hyd brakes. The car...
Need a front wheel for a model 65 durant, Had brake drum machined but not ok. Unable to balance. 406 586 5049,
see a picture of my car in the photographs section.
Members, If Durant Motors used commercial/generic luggage racks for the late 20s or early 30s there is one listed on eBay #170950392201 start price $125.00
1929 Durant - $4500 (pittsburg / antioch)
SFBayAreaCraigslist
This car has been partially disassembled for restoration
the body is off the frame
drive train removed
I have all parts.
was a running, driveable car prior to disassembly.
Moving out of...
I have a Panoramic Photograph in frame of Durant Motors Staff in Toronto Ontario I am willing sell if there are intertested people out there ...You can email me and I can send pics..It measures 30x9 inches and am looking for a reasonable offer from someone...Thanks
OK – health dictates I look for a new home for my baby! (it was dressed up for a parade) I got the ’23 Star in pieces and tho not a pro job in putting it back together it does look and runs good. I would hope one of you club members could take it to t...
Chris Giglin in Tamborine (near Brisbane) has a very rough Rugby 6 cyl. motor in need of a good home. Chris's phone number is 07-55436460 ccgiblin@hotmail.com
I am looking for lt. & rt. front fenders in good or reparable shape
for my 24 Star touring. The ones I have are not usable. Email or call
my cell 520-909-4321. Thanks Glenn.
Posted on eBay #261108000025 is a Wm.Durant-Josiah Dort 1886-90's wagon from their original carriage co(s). for those collectors who haven't completed their collection. No need to worry about parts for the engine or transmission.
I have got a radiator to sell, in good condition.But I do not know on what model or year it will fit, so you have to give me the dimensions of yours.
Henri Houle
i am offering a set of 29 wire wheels for sale. they have drums and includes front axle parts ens to ends/...
rear axle not included just rear drums, brake stuff and wheels...plus fifth spare wheel. tires are not good.... any offers????
gary at 610-256-3255 cell...
Hi All......
Found this company on the AACA forum.
They list new reproduction windshield frames for many Durant products. Also say they can reproduce others from your pattern.
Here is the Link:
http://www.windshieldframes.com/Products/
Enjoy.........F...
I don't know if the car is for sale, but I but it could be. I was at an AACA chapter meeting today, and the host had a pull-barn with a 1924 Dort inside that needs restoration. The Dort seems mostly intact, but it hasn't moved in over 30 years and the upholstery is...
Hello,
I have aquired some Durant Star parts in a group buy of Model A parts. I would like to see them goto people that are looking for them, rather than sit & rot.
I am still trying to figure out what the stuff is, but there is a frame, few engines a rearend and o...
hi i am going to be in ontario july 16 to aug 4 and i have a 26 star sedan for sale excellent body runs well new top chrome tires original glass and upholsery 29000 original miles needs running boards and some wiring to complete .
1 888 803 2834 my toll free cell...
Durant Motor
Motor No.: 267 009
W5A-600-G
4 - Cylinder
Motor appears to be complete, unfortunately it has been stored uncovered for a number of years. The block appears sound with all internal components within.
Please contact for further information.
Rega...
Anybody out there in "STAR" land have an extra right rear fender for a '26 Star. I have the Star M truck but, I'm sure that the fenders are the same as the cars. My present rear fenders consist of the left rear Star fender and someone has put a Ford fender on the r...
The Durant Boyce Moto-Meter shown in the accompanying photos is currently in my possession and was with a bunch of old car and Motorcycle parts I procured from an estate. I have been tasked to sell said parts on behalf of the Widow.
Before I put this item on Ebay...
Needing a camshaft also an oil pump drive gear(10 tooth)for the 6-W Continental engine that is in my Flint model 40...Both my cam and the oil pump gears are badly worn and I need a good usable cam or a cam that can be ground.
I am wondering if this camshaft is uni...
Can any body tell me the length, width, thickness, and species of wood for the 29 Durant 60 coupe running boards. I also need info on dimensions to fab up splash shields.Thanks
i have a 29 model 60 durant that i would love to see someone put back to use,its barn fresh but at least 85% there including wood for patterns.please send me an email address and any requests for specific pics and i will send them to you.i dont have a matching title...
1930 Durant Coupe Parts
This is a followup email to the last two I posted for my dad...This may be your last chance at these 1930 Durant parts. My parents are moving into a condo by June 15 and these parts will go to the scrap yard in the next month. See details...
Hi All.....
Just listed on the AACA buy-sell forum.....
Frank
Have a Durant auto chassis of unknown vintage in NW Iowa. It's been sitting outside for years so a little rusty around the edges. Includes at least wheel (without spokes), hubcaps, transmission, a...
In case anyone has missed it--1930 Durant 6-14 standard sedan on ebay in the other makes section. Buy it now @$12,000. Also seller has invented a "colorful" history for Durant(the man). Ross
I am interested in obtaining another front engine mount plate, like this one, for a late 14L, or possibly a 15L, as used on the Durant D60. This one is severely corroded on the bottom of the L shaped brackets. I thought about wire welding and grinding flat but the me...
Hi; I'm offering my 1930 Durant 610 Deluxe Sidemount Sedan for sale. It's pretty complete and rust free(See club Photos section), also includes a 4 cyl eng (running when stored)and a complete 6 cyl drive-train with Fr and Rr axles (drum to drum) from Calif., plus oth...
Need 4 servicable 21" demountable rims. I think these were made by Kelsey Hayes. Would consider bad rims with good sections. These rims have the lug tabs crimped into the rim. Probably be best to call me at 303 766 4910.
I need some advice from anyone that has knowledge regarding the flywheel mechanism on the Flint E80. I'm told the E55 is compatible. Some believe the flywheel and gear ring are one piece - some say it is two. This flywheel has broken teeth and needs to be replaced...
I need a flywheel for a 1926 Flint E80 Continental 6 cylinder engine. I'd buy a starter, too, if you have one. (Even if it needs to be rebuilt) And a bearing for the radiator fan. Call me: 810-695-0160 email:tompatreyn@aol.com
The speedo/gauges are the same type/size as on the 1924 Star F touring dash (same type) owned by member bob DeAnglis in the photo section. Is the single windshield frame for a 1925 Stat fit the brackets as a split windshield od the same year? Note: I'm unable to dire...