Selling this (email me for pics) nice set of four Durant wood spoke wheels (complete). They are all original and in very nice shape. Caps look great too. They could be restored or just cleaned up. I have not even tried to clean them. They can be picked up in Saranac...
I am in need of a good horn button and surrounding black spark and throttle control cover that is located in the center of the steering wheel. The P/N is 25709 and is the same for '28-'29 Model 40-60 Durant. Please give me a call at 503-244-1608. Phil
In contact with woman selling 4 cylinder Star motor. $150. It does turn. Promised to pass it along.
The motor is a 4 cylinder. If you want to come take a look at it and or take it home, pls text me at 801.645.5893. Our yard is on 12th Street in Ogden., happ...
Just purchased a 1927 Star 6 cylinder car. missing the distributor.
Anyone out there have a spare they'd care to sell? Even pointers in the right directin would be greatly appreciated.
I have a 26 Star F for sale for parts.
Engine (turns free, missing carb)
Trans, drive shaft,diff two good wheels
Radiator,frt fenders,cowl,frt doors,headlight buckets
Fuel tank,seat springs
Chassis,four springs etc
Have Durant 4 cyl ohv engine,radiator,gri...
There are only 2 32 DeVaux sedans known to us. Mine is the 32 Standard that I got from Myron's estate. The other is a 32 Custom sedan. This car came to my attention about 10 years ago. Here is the story: This car was brought from Santa Monica, Ca to Texas and re...
Hi All, FYI on Tuesday June 5th I was at an estate sale at a farm 20 minutes south of Vancouver B.C. Canada, there was a Durant there in pieces, unfortunately I'm illiterate about these cars but perhaps it has some value to you or someone you know. The daughter (Chri...
This is an on-line auction and bidding will start within a couple of weeks to end early in May. Here is a partial listing I copied from the e-mail they sent me.
COLLECTION INCLUDES:
1928 GRAHAM BROS. PICK UP
1925 CHEVROLET
1917 DODGE BROS.
1928 CHANDLER
1921...
Thanks to another Star/ Durant friend I have the top 1/2 of a Beadless Hood . Now I need the sides. If anyone has any they want to part with they need to be 26 1/2 or 27 inches wide and 15 1/2 to 16 inches high. I can use the ones I have but they will have to be cut...
httml full linked. Need hood preferable without rib and lower portion of the lower windshield frame (this can be a rusty part that may not look like it's usable but all I'll need is a section out of the very bottom of it). I tried to post a picture .
Wanted one 1930 or 31 Durant Cowl band.
I believe the cowl band is the same for most models of those years.
Mine is rusted through and not salvageable.
Rick at botti.us
29 Durant doors, hood, gas tank, rear section of frame, head lamp bucket, rear section sheet metal, front and back bumpers.
https://ibb.co/khmXqn
https://ibb.co/b5iOwS
https://ibb.co/fdrtwS
https://ibb.co/gQBhqn
https://ibb.co/gs0xO7
https://ibb.co/mQdHO7
http...
For sale is a 1926 locomobile jr located in Lancaster Ohio. He wants 26k but, price is very flexible. Pictures are on pacific coast spring fling page. Any more information send me a e-mail. thanks
Would like to sell a 1926 Star Touring car in good condition. Asking price $12000.00 Call Al at home after 6:00 pm or weekends at 972 278 2314 or e mail at jhstar26@verizon.net
I have a radiator shell that looks really good. It says Dort flint Michigan on the emblem. I really don't want to sell this to some lady to hang on her wall. I was hoping someone here might have a use for it. Please call or text me 918-906-3221
Need the right side metal channel that the window slides up and down in and the right side metal sill plate cover that goes below the door. Not for me but for a former member of the club. Dave
I have a 1929 Durant Business coupe, all original with 50000 miles, runs and drives great. Solid car with no rust. Wanting $8000 for it but will negotiate. If interested email me and I will get pictures to you. It is 2 tone beige with black running boards, complete w...
Finally got a chance to inventory the parts about which I posted earlier.
1) One complete chassis (1926 I think. External rear brakes, no front brakes. No
tubular back bone in frame.) less engine and transmission with two rebuildable
front wheels.
2) Fi...
I am selling a 1926 Durant star coupster that I have it is fairly complete other that the wood inside I am not willing to part it out I want to sell it as a whole it is located in Grand junction Colorado I am asking $4000obo please let me know if you are interested i...
For years I have been collecting parts to build either a speedster or a depot hack. I'm pretty sure I have enough parts to assemble a running chassis with a 1927 Star cowl, radiator, and shell. Have spare engines, rear ends, transmissions, and hundreds of small parts...
Hi All,
I’ve come into possession of a four-cylinder Star engine, I’m told it is a 1924 model F Star. It’s rough but I have all the parts. Does anyone know of someone who might be interested in it? Email me and I can send you pictures.
If I don't...
Not mine, but I found this on a Facebook rat rod page. Someone needs to get it the heck off of there.
https://m.facebook.com/groups/355275451241866?view=permalink&id=1093819910720746
Selling my 70% restored 1930 Durant 6-14 deluxe sedan. Body painted and on chassis(Balfour blue and black).engine ran well when parked. Six wire wheels with new repro hubcaps. I'd say 99.9% complete(something must be missing, but have many spares).Interior will need...
Desperately need rear oil seal retainer for Continental 15U engine. We are trying to get Mike Larsens Durant Model 17 coupe running and restored for the Durant Meet in Modesto. The oil seal retainer crumbled into bits at the last minute. Any help would be apprecia...
My father has a 1928 Durant Sedan Star, 4 cylinder restored by Rumble Seat Restoration, burgundy with black fenders and a gray cloth interior, garage kept. asking $12000.00 Canadian
If you have any questions don't hesitate to contact me, George at 1.604.302.4941
I need an interior door handle for rear door.
Thank you
http://photobucket.com/gallery/user/ajax0073/media/cGF0aDovSU1HXzYxMjlfenBzODhiYmVuZ2kuanBn/?ref=1
Anyone got a good gas tank for my 1927 Star Frame? I thought I had one but went to install it and nope mines too long and too wide and the filler neck slants the wrong way. Frame width at the front of the tank area is 35 1/2 inches and the tank compartment is just sh...
I have an old Carter DR-0 brass bowl carb that I believe is correct for 1925 and 26 Flint. For sale for $100 plus shipping. Can provide pictures or you can look on my face book page "Antique and Vintage Car Parts"
Posting this for a friend...
For Sale
1928 Durant Model M2 Rideau 4 door sedan – 55,980 miles
Built in Leaside, Ontario. Original Victoria car. Vintage plate #200
4 cylinder Continental engine was running when purchased in 1996.
Have complete engine g...
I have parts available from a spare Durrant salvage by my grandfather years ago. Looking to find them good homes. Let me know if it's anything useful to you. Will try to upload pictures
I still have the 20 inch wheels for sale and they can come with the hubs and brake drums or anyway you might want them. Also have one 20" tire and tube that's for sale. Make an offer as I just need to get rid of them . Dave
Have 4 - 20 inch wood wheels with good wood I'd like to sell so's I can finish my 21 inch wheels. I need to keep the brake drums off the rear wheels though as I have no drums (unless some one has some spare drums for sale) Dave
For Sale two 1921-26 Durant universal joint discs models A-22,4 cylinder,and B-22,6 cylinder. Price $40.00 plus shipping. mribbich@wi.rr.com or 1-262-3922989 Thanks!!!
Marv.
I have a real nice set of 5 Devaux hubcaps for sale. Asking $250 plus shipping.
I also have 2 perfect Devaix Stabelite headlight lenses for sale. Asking $150 plus shipping. email me if interested at jaxmurphys@aol.com
Thanks,
Dennis
Curious as to the purpose of the vertical 3/8" square recesses in the top of the doors above the door handles.
Thank you in advance for any information
I need a 4 bladed fan for my 24 Flint. The mounting holes are 1 3/8" center to center and has 4 mounting holes.
It doesn't have to be a Flint fan as long as the mounting holes are 1 3/8" apart. Email or give me a call at 252-777-1191.
Yates
NEED LEFT SIDE STEERING ARM FOR 1926 STAR.PHOTOS ARE OF RIGHT SIDE ARM. THIS ARM CONNECTS SPINDLE TO TIE ROD.THANKS LLOYD 715-257-7946
%%bbCodeItem_1%%
%%bbCodeItem_2%%
Does anyone have this arm? This arm goes between the spindle and the tie rods. Does not have orientation spur. I have photos of the other side. Does have a stop spur on top.
Hi,
I have a 1925 Star F Coupe that I'm trying to get back on the road. It appears to have a w-5 engine. In the rebuilding process, I've lost the whole oil level assembly, tube, wire, float and all. Does anyone have an oil indicator assembly for sale? Also, can...