I was cleaning up my family's property and found what appears to be Durant Star car. It's basically just the frame which appears to be in great shape and engine. Feel free to reach out with questions.
Lance Haynes has a large lot of used Durant parts in his backyard.
His property is now in foreclosure.
He’ll give these parts to anybody who can come and get them.
He’s in San Diego, CA 92117.
Otherwise, they’re going to the dump.
He has a...
Does anyone know where I might find a rear main seal cover the sits over the rear main bearing. It's for a '29 Durant W5 4 Cylinder engine. It's made of pot metal. The previous person to dismantle this engine wasn't any too kind to this part - it's got lots of cracks...
1930 Durant Model 6-14 original 50 page glove box Instruction Manual. Penciled in purchase date: March 14, 1930.
License data page for all 6-cylinder Phaeton, Roadster, Sedan, and Coupe models.
Includes tri-fold Durant parts order form, letter to new Durant owners,...
Hello and welcome
I just bought my 1925 Star Durant Model F and am looking for a radiator emblem (1925) and Moto Meter Hood Ornament. Maybe some of you have these parts. I will be grateful for the information. Chris
For Sale: 3 Durant radiator emblems 1. Bronze $100 2. Silver $60 3. $15
For Sale: 2 Durant Re-chromed bumper fastener emblems $100 each
Email: rose.dennis@shaw.ca for photos
Wanted! Trico vacuum operated windshield wiper motor for my 1928 Model 65 Durant 4 door sedan. When I purchased my car the car had an aftermarket one rigged to the windshield frame. I'm probably sure that one from an M-2 or M-4 would work though. Can't imagine that m...
For Sale? I have collected 2 Dort Touring cars and in addition a magnitude of Dort spares parts, engines, electrical, wheels and much more. One is fairly complete minus top bows and the other is more of a parts car. I am thinking of liquidating them for parts or givi...
For Sale: Oil Filtrator Housing Gasket for 14L, 15L and 15U Continental 6 cylinder engines. P/N 24026 is a replacement seal with a square cross section to fit the base of the Oil Filtrator. $2 each plus S & H. Contact Phil Peters, 6430 SW Roundtree Court, Portland, O...
I have 4 Star or Durant rear fenders, presumed to be 1924-6? Two left, two right. Some were purported to be NOS. I have had them for 30+ years but my car is long gone. They have been buried in climate controlled storage since 2007 and in my garage before that. $300 e...
My father has what appears to be a 1930 614 coupe, serial #5002 that he is wishing to part with after nearly 60 years. It was running when he parked it in 1966. Everything original is there except a couple fasteners. It needs a full restoration but the car is complet...
Just left the work bench and discovered that I'm missing two tabs which fit in the slots in the plated rims. These slots are in line with the tabs which are riveted in the bottom of the drum housings. Rims were plated 40 years ago and the plater probably lost the tab...
Fellow gearheads
Purchased from Reg Bent's auction July 2022 in Napanee Ontario Canada is his last Durant project car. Normally I am a 1934 Ford guy and have been chasing a roadster for some time now from an elderly gent. Up until I brought the Durant home he was n...
I need several door handles for my 1928 Durant Model 65 4 door sedan like those pictured below. The car came with two that are in so so shape, I need at least two more, but would buy more if I can find them. Check you garage and see what you have. Let me know.
For Sale!!
This is my two-door 1926 Star Car Model M Coupster which has been completely redone with beautifully hand crafted cherry wood and painted its original color of Florentine Green. Unfortunately, I have to part with it due to health issues. So, if anyone i...
I have 3 of my Durants for sale in San Diego, CA.
1. A restored 1929 Durant Model 63 4-Dr. Sedan. This car has the wire spoke wheels and side mount spare tires in the front fenders. It has been converted to 12V. It has been upgraded with a Ford Inline 6 cylinder O...
I've been messing with this finicky car for quite a while ...
currently the starter gear is locking up with the flywheel and have to loosen the starter mounting to get it free. the gear is worn with slight chipping and am looking to replace it to eliminate that...
I posted this on the Durant Face Book page, but wanted to give it as much exposure as I could. Thinking someone will be interested in purchase?
This is not my car - I saw it advertised on Facebook Marketplace and if I wasn't in the middle of several projects would p...
One 1928 Durant 4 cyl Sedan in need of restoration. $3000 Obo 98percent of the wood is there. All the wood inside is in really good shape. I have the roof lumber in my house. Send a note if interested for pictures.
Durantonians- I've decided that it's time to sell my 1930 Durant 6-14 roadster. I'm just not using the car and it should have another caretaker. Call at 208-310-6300. Asking $30,000.00 for this restored beauty. They don't come up very often! Jim Colbert
Durant, Weston and Mott had extensive business dealings. This wrench is stamped "WESTON-MOTT CO". The large end will fit early Durant hubcaps. The other two wrench openings may fit anything. It also has two short pins on one side, but I do not know their purpose.
I...
One aluminum step plate which I believe is for a Star. It has a large Star in the middle of the step plate. There is one small crack in the left lower corner about an inch long. A good vintage driver quality step plate.
I will bring this with me to the meet in Grand...
A new set of 16 rubber universal joint balls. I previously bought these thinking they were needed for my 1930 Durant. They are for earlier model cars, not 1930.I will bring these with me to the Durant Meet in Grand Junction next week.
1923 Durant Star touring automobile
Needs complete restoration and has serious rust issues with that said everything is here motor with all parts are in decent shape frame is complete. Car was parked by family after a loss in family and sat under a tree and melted....
Several years ago, back in the Jeff Gillis days, John Baraldi was manufacturing new Rocker Arms for the A22 Durant motors. Does anyone have a set that they would like to part with, or have any information on them. We have broken one of the original ones on our 1922 E...
I'm looking for parts to a 15U motor (1928-1930)
needing a:
Generator (chain driven) Auto-Lite # GAL 4104
Distributor Auto-Lite # IGB 4008B
520 818 3391 flintauto@gmail.com
I have a surplus instrument panel for 1930 Durant car models 407, 611, 612, 614, 617 and it also fits 1930-33 Rugby trucks 406, 416, 615, 616. It's in average shape, quite restorable and has the chrome trim piece still attached on the front. Only the speedometer is a...
FOLLOWING FOR SALE:
FRONT SHEET METAL INCLUDING FRONT FENDERS,HOOD , RAD SHELL, LOWER PAN
1930 DURANT FRAME, GOOD SHAPE
1929 DURANT BRAKE BACKING PLATES WITH ALL LITTLE PARTS FOR WIRE WHEELS
( ALL 4 WHEELS SET)...WIRE WHEELS GONE.
SOME OTHER SMALL PARTS...FOR 3...
Homemade Tractor with a Geneva Adapto Tractor Kit. Built and modifications done in the late 1930's. COWL Model NE 8027, 1923 motor W4 #4130XX. Restored in 1975 and always stored inside. Slow speed and neat old tractor. For sale for $2,800.
Star 4 cylinder motor with flywheel, clutch, radiator and radiator housing for sale. Serial number is 53267, reportedly from a 1927 Star but have also been told it is from a few years earlier. Appears to be all there with distributor, coil, starter, etc.. Radiator ha...
I'm looking for a Spicer ball type u-joint coupling for my 1929 Rugby 401 as used on many Rugby/Durant vehicle models around that time. This is a link to photos of the coupling part that I seek https://drive.google.com/drive/folders/1tBifWbpKY6gE7rgCkRR2JthDGyQbMNKH?...
Hi, a friend of mine has a large Durant Motors metal sign that he is wanting to sell. It is 48" x 96" he is asking $1500 for the sign. I can text a picture to anyone interested. My number is 308 293 5764
I have an original set of early Durant club magazines for sale.
They are from the first 22 years of the club.
They go from May 1976 (Volume #1 issue #1 to Volume #5 issue #4 - February 1981) when the title was the "Durant Family Registry".
The title changed with...