I need an SU carb like the one pictured.
Any condition will do as I really need the brass parts. Any spare parts bins out there?
kn

Where Are You From? Kent Wa

Do You own a car built by Durant? '30 6-14 standard sedan

Keith ol' sport- I've got some spare parts. Let me know what you need. Roscoe

Where Are You From? Orygun

Do You own a car built by Durant? 1930 6-14 standard coupe

Hey Ross, yeah if you have got any Stromberg parts
send me an E-list.
How'd that bumper work out?
Kn

Where Are You From? Kent Wa

Do You own a car built by Durant? '30 6-14 standard sedan

Hi Keith,
I´m looking for the TOP-COVER ( to the front of the carb) mine is broken and the gasoline is coming out of the screw/ coming into the carb. ( from gas-pump to carb).
It is such a Stromberg U-2 Carb as shown on the picture.
Do you have some more parts ??? Do I need any other parts that may brake after a while and you have it in spare ???? Do yo have a drawing of that too ????

If you could give me a hand with that would be fantastik. Germany is too far away from your place

thanks thorsten

Where Are You From? germany

Do You own a car built by Durant? Rugby truck

Hi Keith,
I´m looking for the top cover ( to the front of the carb) mine is broken and the gasoline is coming out of the screw/ coming into the carb. ( from gas-pump to carb).
It is such a Stromberg U-2 Carb as shown on the picture.
Do you have some more parts ??? Do I need any other parts that may brake after a while and you have it in spare ????

thanks thorsten

Where Are You From? germany

Do You own a car built by Durant? Rugby truck

Thorsten-Yes that top cover to the Stromberg U-2 is easy to break, especially where the supply line comes in. It tends to get overtightened and the pot metal will crack. Mike and Neil Butters listed in the vendor section should still make a reproduction from the late Harvey Frid's list of reproduced Durant parts.

Where Are You From? Orygun

Do You own a car built by Durant? 1930 6-14 standard coupe

Ok,
Where do I get maybe a tlf no or email adress of those guys from ???
They might have also parts for cab of the Willys Knight ??
email would be perfect.

thanks thorsten

Where Are You From? germany

Do You own a car built by Durant? Rugby truck

Hi Thorsten, the top cover that Butters makes is cast
aluminium with all the cannels and holes filled in. It needs to be machined which is no easy task.
I will post more on this subject W/ pics of what I have done. Zenith makes a good replacement carb
that works very well, but you will lose authenticity
kn

Where Are You From? kent

Do You own a car built by Durant? 6-14

I purchased one new reproduction plate called float chamber top, for a Stromberg U2 from Vintage and Classic Reproductions from Austrailia. Did not require any remachining. Fit perfectly. Contact Glenn and Rosemary Smith PH. 61-3300-1130 or WWW.VintageandClassicReproductions.com email:vintagereproductions@bigpond.com

P.O.Box 323 The Gap Qld 4061 AUSTRAILIA Hope this helps, Jim

Where Are You From? Toronto, Ohio

Do You own a car built by Durant? 1930 Durant coach

Jim- that's good to know that a good repro top cover
is available. Thx for the info.
Kn

Where Are You From? Kent Wa

Do You own a car built by Durant? '30 6-14 standard sedan