Hello all,
My father just purchased what appears to be a 1929 Durant 70 DeLuxe Sedan in full operating condition. He says the interior is nearly flawless save some rust, and the exterior has no apparent physical damage and is in good shape. He's new to the Durant wo...
I've put off asking as it sounds dumb for such a small thing. I'm trying to make a set of lights for Dorothy and the type require the 3 spring steel lense retainer wires per lense. I've been to flea markets and folks have various lights, lenses and parts but never th...
My 1930 6-14 Durant deluxe sedan was in the 18th annual Harbor Run car show in Channel Islands Harbor on the 14th of Sept. 2008.
I wanted to go to Astoria, but did not have a trailer to haul my Durant, maybe next year.
Take a look at the website listed below fo...
Jane and I as well as Mike and Rosalie Larsen want to thank everyone that attended the 11th Annual meeting this last week in Astoria, OR. We know that it was a long drive (flight) for a number of you and appreciate the time and effort that you put in attending this...
Hi Everyone,
I haven been quite as of late with my job and preparing for the DMAC meet I haven't gotten back or posted anything for a while.
I'm leaving in less than an hour for Astoria as will hopefully see a lot of you there.
Rick
I just wanted to say a huge heartfelt thank you to everyone for making the kids and I feel so welcomed at the Meet! We really appreciate all of the thoughtful gestures. The special tea party set for Charlotte and the T Shirts for the kids were really appreciated b...
Read about our meeting in the local Astorian newspaper!!!!
Link to online edition below or click the little computer icon on your left.
Rick
http://www.coastweekend.com/main.asp?SectionID=85&SubSectionID=1002&ArticleID=41585&TM=37969.98
I have looked at this car and was wondering if anyone has some info to share.
I am very interested in buying but not sure yet.
It is 90% original with Horseless Carriage plates. 6 cyl and in good shape.
Any info or insight would be appreciated. With several vehic...
Hello world.
Today we all celebrate the founding of GM by our leader Billy Durant. Yes September 16th 1908 was the date. I for one am proud to be a Durant groupie as our late great writer friend Beverly Rae Kimes coined in one of her many writing's of our guy Billy....
2nd Try:
I have a 1929 Durant radiator w/shell and emblem. I would trade for a new license plate topper if you pay shipping charges. The radiator is really rusted but the emblem only has minor scratches.
I'm looking for the following for a 1930 614:
Driver's side door latch assy
Driver and Pass window lifters
Please email me at mjordan13@gmail.com if you have any of these parts for sale.
Thanks,
Mike
Hello All You Durant Partners,
I received my Durant Partner and Membership Roster today. It looks very good. I didn't get time yet to read it because once I start I can't put it down.
In the Membership Roster please change my PO Box number to 55. It is no longer P...
Got the club magazine yesterday, very good job Carol. Today I received the membership roster with the totally new format. I wish to thank Carol and Judy for their contribution to the new roster. Good job to both of you.
car still has orginal paint,very little rust! windows roll up n down,wipers, wing windows.complete car, needs to be restored. ive no time or the money. was owned by one family till i got it. 503-504-0823 call for more info.
Hi ,I am looking for a
passenger side rear fender for my 29 Durant 4 door sedan. It is a model M4, 4 cylinder. Any help appreciated.
Have a right front for trade or buy outright.Phone 510 912 5138.
Thanks, Rockey Marino
Does anyone kown if there are any living relatives associated with William Durant the founder of GM/Durant motor Co. My dad recently told me that one of our relatives owns a Durant car, which they plan to sell for approx $20,000. ive been told it still runs and sti...
I am heading out on tueday to Surrey - Then on to Astoria on wed . I am travelling with a 1 ton pick up--lots of room for stuff if anyone has anything they want hauled there.Get in touch with me soon and I will try to arrange picking up whatever it is . I can be reac...
All,
I just came accross this for anyone up near the central Ohio area, it might be worth going to look at it. The picture listing shows a nicely restored 2Dr sedan.
"27 Durant Star Model M 2Dr Sedan Beautifully restored, runs & drives great $12,000." Looks like...
trying to find what carb i have on my car and trying to get parts for it ,the carb is brass with a flat plate in front with 1 screw holding down float cover . There is # on side that is o723 stamped in the side i have pictures if any 1 can help thanks James quicksell
Is there anyone out there who might have a spare ID plate for a Durant car from the Oakland plant? I'd love to purchase same. Also a Hayes-Hunt body tag?
Franz and I are thinking of making a replacement for the horn button and switch that was used on my 1925 Star and other Durant products. The switch slips inside the nut that holds the steering wheel on and the button overhangs the nut. The switch, button and nut ar...
I have a 1929 Durant radiator w/shell and emblem. I would trade for a new license plate topper if you pay shipping charges. The radiator is really rusted but the emblem only has minor scratches. I will attempt to attach pictures to this posting.
Hooray, Hooray, Hooray!!!!! At Last, after 14 years of working off and on my '22 star touring. it is now road ready. We made it around the block twice and down to get pizza this evening. Looks like it might make it to Astoria. If not, the '27 Star Model R will go....
Alright DMAC members, I'm issuing a challenge to you. I just love to look at the DMAC member's cars. And I don't see any new ones listed in the photograph section of this web site. Sooo I think that if your car is not one of those on the photopage, you need to get a...
Hi Everyone,
We are just 2 months away from the start of the 11th Annual DMAC meeting and Tour and just 1 month (August 15, 2008) away from the registration deadline. Mike Larson and I have the tours layed out and reservations for the meals and hotels.
To date...
After getting the radiator recored, we now need to purchase replacement rad hoses. I like the look of those red-colored hoses on Rick Botti's roadster. Where are they available? What size of hose should be requested ? And, what length of hose stock is required ?...
I am looking for a rolling Durant chassis M-2 or earlier. I would like to begin a smallish project that will fit in my one-car garage. Please let me know if any reasonable possibilities are out there...or am I barking up a dead tree?
Hello,
After 24 years on the road, my Model R (see my cars pics in the 'photographs' part of this site)needs a new flywheel ring gear. I'm pretty sure it's 112 teeth. Does anyone know of a source for these - and exact dimensions? Even a manufacturer and a part...
i have these parts for sale
frt axle an steering linkage 75$
diff 100$
14l motor 1500$
trans 75$
4 wood wheels w/bearings 200$
all parts are in excellent codition and can be u...
I have a question it has Been over 50 years sense I have driven a manual spark advance distributor car. I have a 1925 Star 4 door sedan A-22 4 cylinder, it will be on the road this week. Is there a formula for advancing the spark lever or is it just by the seat of yo...
GREAT NEWS
MY 1923 STAR TOURING WON THE 1ST PLACE JUNIOR AT THE CUMBERLAND AACA MEET YESTERDAY. I THINK IT IS A GREAT DAY FOR OUR DURANT CARS AS I BEAT OUT SOME HIGH END CARS LOADED WITH A LOT OF CHROME AND BELLS AND WHISTLES.(MOPAR STUFF)NOW ON TO HERSHEY IN OCTOBE...
Hello all,
Just wondering what advice there is out there re what type of modern rear oil seal to use in my '26 Mod 'R' Rugby. (14L motor). I'm starting to lose a fair bit of oil out there, so it's well and truly due for a replacement. The engine reconditioner th...
1930 durant sadan car was in one family untill i bought it at an estate sale. been inside very little rust, car is complete. no time to restore. orginal paint still on car
I've been looking at my model 65 that I think is most original, but I have a question for the club members. In the engine compartment, was the firewall originally painted black or body color? Mine is black and looks to be the original paint, runs and all. The body an...
I am getting prepped for my trip. I have a small problem tho. I know I am to bring a U joint --and steering box for Rick Botti and I am bringing a pair of motor mounts --but forget who asked for them . Good memory but its very short. I wrote this down but now cant...
I have been working on a ground-up restoration of my 1926 Star 4 Coupster Model M for 20 years. On July 11, 2008 I started the engine for the first time, and I ran the car in the local parade on July 24, 2008, winning first prize in the Antique division. My family...
I and my friends have been working on my 1921 Dort Model 17 Touring and it now runs and is nearly original. Needs new top, and needs to be painted. I called on getting an antique vehicle license and was told that it needs to have brake lights, turn signals, etc. I...
OK old Star car experts I need your help. Just bought a unknown year Star touring car here from our auto museum with a(new improper title saying 1926)
and id W5421239 which is the motor number and it has the W5 ID Star brass tag still on it.
Wheel base measures a...
One of the best buys I have made is a rim jack. Found it at a flea market. Paid $15. Like brand new, don't think it was ever used, still had the paint on it. It hung in my garage for a couple of yrs. Didn't realize how invaluable a tool this would be. Well, I just in...
I was wondering if there is a way to increase the drag on the throttle and spark levers. When I start my D65 I have to bottom out the fuel lever in order for it to hold. This is quite unnerving when it starts as the RPM is very high. I only hand crank as I find it st...
I'm happy to announce that Dave Roberts the Forum's own "Wolfman" is now our new Rugby Technical Advisor!
Thank you Dave for accepting on this position, I'm very excited and know you'll bring a wealth of information to the post.
Rick Botti
President
Dur...
I have contacted West Peterson, Editor-in-Chief of the Antique Automobile, which is the official publication of the Antique Automobile Club of America. I approached him with the thought of an article on Billy Durant.
He is interested in the article and would also li...