Hi, I have recently acquired a Durant engine converted to a power unit which powered a saw mill. The engine is quite complete, although the valve cover is missing and it has sat outside uncovered. The engine is free and turns, but about half the valves are frozen.The starter is missing also. It has a good radiator and grill shell.Clutch and flywheel are there. There is an older differenial incorporated in the mechanics of the drive ,that I suppose could be from a Durant,but I'm not sure.The block has cracked and been welded at some time.Casting date on the block is 5/1 or 10/23. I'm told this is an Amsted engine. I'd like to sell what I have. Email at lgdube@bresnan.net or call Lou at 719-486-1518